Recognize And Understand Home Networking Components:

If you haven’t made up your mind yet, you’ll likely soon need to connect two or more computers in your home. You want to be armed to teach knowing what it takes to connect your computers together.
The first plan You must first decide which network is best for you. When your computers are in the same room, you should not think about the wireless network, as it is better if the wired network via cable works well.
It is possible that a computer that may be close to each other but cannot be seen and …

Keywords:
computer repair,computer upgrades,computer training,software

Computer that may be close to each other but cannot be seen may and have phone jacks close by can easily be networked with the HomePNA Network.While PCs that areWhen they are far apart, it can be connected to a power line network, assuming wall outlets are nearby.
Where there are computers in different rooms and you want the convenience of moving systems from one room to another, the more expensive wireless network is the way to go. Great help, let’s take a look at each network and It is one of the most important components needed to get it running.
The WIRED ETHERNET NETWORK
In the event that your computers are in the same room, the core network group can connect your systems to each other. You must first make sure that any kit or component you buy is opened carefully and does not damage the box it came in, and the important thing is to make it easier to return the component if necessary.
The most important step is that the basic sets contain instructions and software for the network as it is seen as two network interface cards (NICs), preferably known as network interface cards, as these NICs are installed in empty slots in the system unit.The PCI port is where the card is installed and there are also USB adapters, it is known that the network will need cables to connect computers and CAT 5 or Class 5 cable is the one to look for.
Ethernet networks include 10 and 100 Mbps, or Mbps, and a wired network will also need a Hub or Switch to route traffic from each system.When you want traffic to be fast, and when you don’t, you should connect a switch instead of a hub. When you want to connect all computers to the Internet, most of the kits come with It is a special bridging program that connects systems together.
The WIRELESS HOME NETWORK
Of course, these networks rely on wireless networks on radio frequency to transmit and receive data, and wireless network equipment will provide you with a choice between wired and wireless connections.
When your computers are in direct line with each other, we can use infrared or infrared frequency, but sometimes most wireless networks now use wireless transceiver technology with existing computers. just about anywhere.
Of course, you will need a wireless router to connect each computer to the network, and also it is necessary to install wireless NICs in each computer in the network. When you purchase your wireless kit. of the indoor range.
When looking at a wireless router, you will have the option to connect your computers together should something go wrong with any wireless component. You should note the difference between wired and wireless nic cards.
The POWERLINE NETWORK

One of the most important factors that the power line network uses is the electrical wires in your home to transmit data to and from each computer. At present, current power line networks operate between 50 kilobits per second or kilobits per second and 350 kilobits per second.
This network has a flaw on the back, as it will have a lot of electrical noise that will cause the network to lose speed, and allow other computer users to snoop on your computer if they know how. To be protected you will
This network needs a router to transmit data and nic cards for each system, a bridge will be needed to access the Internet, we can use these bridges with your router.

The PHONELINE NETWORK

The most basic components that you will need in a home network are close to those in a wireless network. In most cases, a network speed of 10Mbps will be fast enough for home users. As it
Computers are connected to a switch, gateway, or router to share Internet access and send data to each computer over a telephone line network, and this network is the easiest to set up.
Phoneline network adapters are installed in every computer. A USB port connection or Universal Seriel Bus is the most commonly used adapter for telephone networks, to reduce line noise, a telephone filter may be required. from the phone jack.
Where it is from the graph to sign up for a Poneline account.
Briefly and simply, it is necessary that all networks need some kind of switch inserted into the computer, and also that each network will need a hub, switch, or router to transmit data, and Windows 10 will contain the necessary software and drivers to make everything work together. From here, adapters and other devices will come with a device driver that enables the devices to talk to the computer.
So we got to know and took a quick look at the hardware needed to connect two or more computers, as connecting devices was fairly straightforward when we connected our computers using wireless technology. Learn all you can about computer networking and you will be grateful to have this knowledge should you be having computer problems.
Since we have seen basic network components,its time to see how each component is installed and connected.Then we’re going to see how to move data from one machine to the Others and also in terms of sharing the Internet using broadband with a DSL or cable modem. It is important to remember to always enjoy getting to know your computer by performing as many tasks as possible without causing it.damage to your system.